Abstract. Ground magnetic anomaly separation using the reduction-to-the-pole (RTP) technique and the fractal concentration-area (C-A) method has been applied to the Qoja-Kandi prospecting area in northwestern Iran. The geophysical survey resulting in the ground magnetic data was conducted for magnetic element exploration. Firstly, the RTP technique was applied to recognize underground magnetic anomalies. RTP anomalies were classified into different populations based on the current method. For this reason, drilling point area determination by the RTP technique was complicated for magnetic anomalies, which are in the center and north of the studied area. Next, the C-A method was applied to the RTP magnetic anomalies (RTP-MA) to demonstrate magnetic susceptibility concentrations. This identification was appropriate for increasing the resolution of the drilling point area determination and decreasing the drilling risk issue, due to the economic costs of underground prospecting. In this study, the results of C-A modelling on the RTP-MA are compared with 8 borehole data. The results show that there is a good correlation between anomalies derived via the C-A method and the log report of boreholes. Two boreholes were drilled in magnetic susceptibility concentrations, based on multifractal modelling data analyses, between 63 533.1 and 66 296 nT. Drilling results showed appropriate magnetite thickness with grades greater than 20 % Fe. The total associated with anomalies containing andesite units hosts iron mineralization.

Abstract. Ground magnetic anomaly separation using reduction-to-the-pole (RTP) technique and the fractal concentration-area (C-A) method has been applied to the Qoja-Kandi prosepecting area in NW Iran. The geophysical survey that resulted in the ground magnetic data was conducted for magnetic elements exploration. Firstly, RTP technique was applied for recognizing underground magnetic anomalies. RTP anomalies was classified to different populations based on this method. For this reason, drilling points determination with RTP technique was complicated. Next, C-A method was applied on the RTP-Magnetic-Anomalies (RTP-MA) for demonstrating magnetic susceptibility concentration. This identification was appropriate for increasing the resolution of the drilling points determination and decreasing the drilling risk, due to the economic costs of underground prospecting. In this study, the results of C-A Modeling on the RTP-MA are compared with 8 borehole data. The results show there is good correlation between anomalies derived via C-A method and log report of boreholes. Two boreholes were drilled in magnetic susceptibility concentration, based on multifractal modeling data analyses, between 63 533.1 and 66 296 nT. Drilling results show appropriate magnetite thickness with the grades greater than 20 % Fe total. Also, anomalies associated with andesite units host iron mineralization.