The strain variation during the isothermal holding under constant stress was studied in the quenched or annealed Ni51Ti49 alloy samples. The isothermal strain variation was found in both samples and this strain was completely recovered on subsequent unloading and heating. This allowed to conclude that the strain variation on holding was caused by the isothermal martensitic transformation. It was found that the maximum value of isothermal strain depended on the alloy heat treatment. This value was equal to 0.5 % in annealed sample and it was equal to 6 % in quenched sample. It was assumed that the formation of the Ni4Ti3 phase during annealing led to a decrease in concentration of substitutional Ni atoms in NiTi phase that were responsible for the isothermal transformation. As a result, the less volume fraction of the martensite formed during holding that supresses the strain variation in annealed samples.