This paper presents an experimental study on the development of polymer bio-composites. The powdered coconut shell, walnut shells and Rice husk are used as reinforcements with bio epoxy resin to form hybrid composite specimens. The fiber compositions in each specimen are 1:1 while the resin and hardener composition 10:1 respectively. The fabricated composites were tested as per ASTM standards to evaluate mechanical properties such as tensile strength, flexural strength, shear strength and impact strength are evaluated in both with moisture and without moisture. The result of test shows that hybrid composite has far better properties than single fibre glass reinforced composite under mechanical loads. However it is found that the incorporation of walnut shell and coconut shell fibre can improve the properties.

No abstract

No abstract

Nimonic C-263 is a British nickel–chromium–cobalt–molybdenum alloy specially meant to be used in high-temperature and high-strength applications. Consequently, it produces high thermo-mechanical loads on the machining tool when machined. As a result, excessive heat is generated during dry drilling, between Nimonic C-263 and tungsten carbide tool coated with Alcorna, which in turn reduces the durability of the tool. In order to determine the temperature distribution of the tool, the coupling of finite element machining simulations along with computational fluid dynamics simulations is performed. The temperature distribution of the tool under dry condition is simulated via the DEFORM 3D software and the Altair AcuSolve software. Further investigation under cooling condition is performed using Altair AcuSolve software. The mass flow rate of the coolants is kept constant when the temperature distribution is obtained during the CFD analysis under cooling condition. Silver nano coolant has high heat reduction compared to other coolants and is found to generate 34% less heat than dry condition.

No abstract