Indium tin oxide (ITO) films have been prepared by the magnetron sputtering technique from a target of a mixture of In2O3 and SnO2 in the proportion 9:1 by weight. By optimizing the deposition conditions it has been possible to produce highly transparent (transmission ∼90%) and conducting (resistivity ∼10−5 Ω cm) ITO films. A resistivity ∼10−4 Ω cm has been obtained for films of thickness ∼1000 Å at a comparatively low substrate temperature of 50 °C and without using oxygen in the sputtering chamber. To characterize the films, the following properties have been studied, viz., electrical conductivity, thermoelectric power, Hall effect, optical transmission, and band gap. The effect of annealing in air and vacuum on the properties of the films have also been studied.

No abstract

The degradation of tin-doped indium-oxide (ITO) films in glow-discharge plasmas of hydrogen and argon have been investigated. Parameters which have been varied for the study include the temperature of ITO under ion bombardment, the rf power density, the time of exposure to plasma, and the gas flow rate. After bombardment, scanning electron micrograph observation, measurement of sheet resistance, transmittance and reflectance, and Auger analysis have been carried out to decide the extent of degradation. Magnetron-sputtered ITO films have been found to be more resistant to ion bombardment damage compared to electron-beam evaporated films. The degradation of ITO under the plasma of the reducing species such as hydrogen has been found to take place at lower temperature and power density compared to argon plasma.

No abstract

No abstract