Polymer and composite materials are becoming more and more widely used in the Russian automotive industry. The Russian market of polymer materials for automotive components is characterized by an insufficiently developed production of some types of such materials. And, as a result, the use of imported materials. Styrene plastics are one of the innovative materials for the automotive industry. Using them in a car makes the product more attractive to customers. The use of this type of plastics allows to create a new look for the car. This applies to both the interior and exterior. The aim of this work is to develop the composition of a polymer composition based on ABS plastic from domestic raw materials. In addition, the new mixed composition should replace imported mixed compositions or contain a minimum amount of imported components of the composition, which will significantly reduce the cost of products and accordingly the car. The article analyzes the polymer materials used in the automotive industry. The disadvantages of using these materials in their pure form are revealed. The selection of the components of the composition of the impact-resistant material with the development of its formulation has been made. The composition of an impact-resistant polymer composition based on ABS plastic and PC has been developed, which is not inferior in terms of the complex of properties to the imported material. The influence of the composition of ABS-plastic, various grades of polycarbonate, their ratio in the polymer composite material on the physical, mechanical and technological properties of the obtained composition has been investigated. It is shown that the best set of properties is possessed by a material based on 2020-30 ABS-plastic and PC-3S polycarbonate with a component ratio of 70%:30%.