Biomolecular motors such as F1-adenosine triphosphate synthase (F1-ATPase) and myosin are similar in size, and they generate forces compatible with currently producible nanoengineered structures. We have engineered individual biomolecular motors and nanoscale inorganic systems, and we describe their integration in a hybrid nanomechanical device powered by a biomolecular motor. The device consisted of three components: an engineered substrate, an F1-ATPase biomolecular motor, and fabricated nanopropellers. Rotation of the nanopropeller was initiated with 2 mM adenosine triphosphate and inhibited by sodium azide.

No abstract

The controlled synthesis of PbSe nanocrystal quantum dots with narrow size distributions was achieved through phase decomposition of the PbSe solid solution in a phosphate glass host. Structural characterization by electron microscopy and x-ray diffraction shows that the dots have mean diameters between 2 and 15 nm. The exciton Bohr radius a B ϭ46 nm in PbSe, so these quantum dots provide unusual and perhaps unique access to the regime of strong quantum confinement. The optical absorption spectra are compared to the predictions of a theoretical treatment of the electronic structure. The theory agrees well with experiment for dots larger than ϳ7 nm, but for smaller dots there is some deviation from the theoretical predictions.

We report the fabrication and characterization of paddle oscillators featuring nanometer-scale supporting rods. The devices show two resonances in the 1-10 MHz range, which we attribute to the translational and torsional modes of motion. While the frequency response of the translational motion shows evidence of nonlinear behavior, the torsional response remains symmetric throughout the range of excitation. We present a model for the electrostatic excitation of the two modes. Torsional motion is induced via asymmetries of the system, and amplified by a modulation of the effective torsional constant. The model of the translational motion predicts a nonlinear behavior for displacements as small as 15 nm. Analysis of both modes of motion consistently suggests structures softer than expected from bulk silicon. Quality factors approaching 10 3 are measured.

Micromechanical oscillators in the rf range were fabricated in the form of silicon discs supported by a SiO2 pillar at the disk center. A low-power laser beam, (Plaser∼100 μW), focused at the periphery of the disk, causes a significant change of the effective spring constant producing a frequency shift, Δf(Δf/f∼10−4). The high quality factor, Q, of the disk oscillator (Q∼104) allows us to realize parametric amplification of the disk’s vibrations through a double frequency modulation of the laser power. An amplitude gain of up to 30 was demonstrated, with further increase limited by nonlinear behavior and self-generation. Phase dependence, inherent in degenerate parametric amplification, was also observed. Using this technique, the sensitivity of detection of a small force is greatly enhanced.