The work is devoted to the study of pectin extracts ultrafiltration  using different types of membranes. Pectic extracts are the solutions of high molecular weight polysaccharides (MM from 15 to 50 kDa), which are destroyed in the process of heat treatment in the vacuum evaporating apparature, that leads to a significant deterioration in the quality of pectin. The impurity components in the pectin extract of a low molecular weight, which makes it possible to use ultrafiltration for both concentration and purification from ballast substances, that  is very important. The objects of research were pectin extracts obtained from citrus raw materials; the membranes of the type UAM-100 and 200A were used as filter membranes. The results of the study have been shown, that the use of UAM-100 membranes in a stationary cell allows to remove up to 20% of the solution within 20 minutes, and with - stirring up to 27%. The use of membranes with large openings (up to 200 A) makes it possible to activate the process of the separation and concentration of pectin extracts: the degree of concentration reaches up 45%, the content of solids in the concentrate increases up to 7.6%, and the content of pectin to up 6.4%, that is in 1,7 times. However, the loss of low molecular weight pectin in the filtrate is about 4%. A comparative analysis of the results of research has shown a high productivity with the use of the capron membrane 200A, as well as on the qualitative parameters of the pectins, released from the concentrates, the higher parameters for the uroconid component, molecular weight, pectin jelly strength and complexing ability were noted for pectins isolated using the UAM- 100 membrane.