No abstract

No abstract

Oxy-fuel combustion is considered a promising technology for carbon capture, utilization, and storage (CCUS). One of the primary limitations on full-scale implementation of this technology is the significant increase in the cost of electricity due to a large reduction in plant efficiency and high capital costs. Recently a new concept, namely staged, pressurized oxy-combustion, has been developed in which the flue gas recycle is reduced significantly by means of fuel-staged combustion. At higher pressure the latent heat of condensation of the moisture in the flue gas can be utilized in the Rankine cycle, further increasing the plant efficiency. As determined through ASPEN Plus modeling, this approach increases the net plant efficiency by more than 6 percentage points, compared to first-generation oxy-combustion plants. The early stages of the system involves burning coal in high oxgen concentration, which means the flame temperature is extremely high. New boilers designs are required to handle these extreme conditions. In the present papr, a unique burner and boiler has been designed via computational fluid dynamics (CFD) to effectively and safely burn coal under conditions of elevated pressure and low flue gas recycle. The enclosed jet theory was used to design a combustion system with slow mixing and no external recirculation, which helped minimize flame impingement and ash deposition. A cone-shaped geometry was utilized to minimize the effects of buoyancy in the down-fired, axial-flow system. A 1540 MWth SPOC system was simulated based on this design and the results showed that a relatively uniform distribution of wall heat flux can be acheieved and the peak wall heat flux was under a manageable level even though local gas temperature are extremely high.

No abstract

No abstract