No abstract

Continuous hydrolysis of an active pharmaceutical ingredient intermediate, and subsequent liquid−liquid (L-L) separation of the resulting organic and aqueous phases, have been achieved using a simple PTFE tube reactor connected to a miniscale hydrophobic membrane separator. An alkoxide product, obtained in continuous mode by a Grignard reaction in THF, reacted with acidic water to produce partially miscible organic and aqueous phases containing Mg salts. Despite the partial THF− water miscibility, the two phases could be separated at total flow rates up to 40 mL/min at different flow ratios, using a PTFE membrane with 28 cm 2 of active area. A less challenging separation of water and toluene was achieved at total flow rates as high as 80 mL/min, with potential to achieve even higher flow rates. The operability and flexibility of the membrane separator and a plate coalescer were compared experimentally as well as from a physical viewpoint. Surface tension-driven L-L separation was analyzed in general terms, critically evaluating different designs. It was shown that microporous membrane L-L separation can offer very large operating windows compared to other separation devices thanks to a high capillary pressure (Laplace pressure) combined with a large number of pores per unit area offering low pressure drop. The separation device can easily be operated by means of a back-pressure regulator ensuring flow-independent separation efficiency. Simple monitoring and control strategies as well as scaling-up/out approaches are proposed, concluding that membrane-based L-L separation may become a standard unit operation for continuous pharmaceutical manufacturing.

No abstract

No abstract

No abstract