As coprocessed excipients (CPE) gain a lot of focus recently, this article compares three commercially available CPE of Avicel brand, namely, CE 15, DG, and HFE 102. Comparison is based on measured physical properties of coprocessed mixtures, respectively, flow properties, pycnometric density, mean particle size, specific surface area, moisture content, hygroscopicity, solubility, pH leaching, electrostatic charge, SEM images, and DSC. Tablets were made employing three pressure sets. Viscoelastic properties and ejection force were assessed during compression, as well as pycnometric density, mass uniformity, height, tensile strength, friability, disintegration, and wetting times. Avicel CE 15 is of mid-range flow properties, contains mid-size and nonspherical particles, and has high hygroscopicity, growing negative charge, best lubricity, lowest tensile strength, and mid-long disintegration times. Avicel DG possesses the worst flow properties, small asymmetrical particles, lowest hygroscopicity, stable charge, intermediate lubricity, and tensile strength and exhibits fast disintegration of tablets. Finally, Avicel HFE 102 has the best flow properties, large symmetrical particles, and middle hygroscopicity and its charge fluctuates throughout blending. It also exhibits inferior lubricity, the highest tensile strength, and slow disintegration of tablets. Generally, it is impossible to select the best CPE, as their different properties fit versatile needs of countless manufacturers and final products.

No abstract

Deoxynivalenol (DON), produced by the Fusarium genus, is a major contaminant of cereal grains used in the production of fish feed. The effect of mycotoxin deoxynivalenol on rainbow trout (Oncorhynchus mykiss) was studied using a commercial feed with the addition of DON in a dose of 2 mg/kg feed. The fish (n = 40) were exposed to the mycotoxin for 23 days. The trout were divided into two groups, control and experimental groups. Control groups were fed a commercial feed naturally contaminated with a low concentration of DON (225 μg/kg feed); experimental groups were fed a commercial feed with the addition of DON (1964 μg/kg feed). Plasma biochemical and haematological indices, biometric parameters, and histopathological changes were assessed at the end of the experiment. The experimental groups showed significantly lower values in MCH (P < 0.05). In biochemical indices, after 23-day exposure, a significant decrease in glucose, cholesterol (P < 0.05), and ammonia (P < 0.01) was recorded in the experimental group compared to the control group. Our assessment showed no significant changes in biometric parameters. The histopathological examination revealed disorders in the caudal kidney of the exposed fish. The obtained data show the sensitivity of rainbow trout (O. mykiss) to deoxynivalenol.

The article describes the development and production of tablets using direct compression of powder mixtures. The aim was to describe the impact of filler particle size and the time of lubricant addition during mixing on content uniformity according to the Good Manufacturing Practice (GMP) process validation requirements. Processes are regulated by complex directives, forcing the producers to validate, using sophisticated methods, the content uniformity of intermediates as well as final products. Cutting down of production time and material, shortening of analyses, and fast and reliable statistic evaluation of results can reduce the final price without affecting product quality. The manufacturing process of directly compressed tablets containing the low dose active pharmaceutical ingredient (API) warfarin, with content uniformity passing validation criteria, is used as a model example. Statistic methods have proved that the manufacturing process is reproducible. Methods suitable for elucidation of various properties of the final blend, e.g., measurement of electrostatic charge by Faraday pail and evaluation of mutual influences of researched variables by partial least square (PLS) regression, were used. Using these methods, it was proved that the filler with higher particle size increased the content uniformity of both blends and the ensuing tablets. Addition of the lubricant, magnesium stearate, during the blending process improved the content uniformity of blends containing the filler with larger particles. This seems to be caused by reduced sampling error due to the suppression of electrostatic charge.

No abstract