The article presents the technology and process, whereby a small-scale demonstration model and the real-scale prototype of vertical axis wind turbine blades are produced using rapid prototyping technology (3DP) and GFRP surface coatings, which help to improve the mechanical properties. In the end of the article the results of the production process and the advantages of combining these technologies are presented.

The article presents the process by which, with the help of 3D printing technology, the piston of the differential injection device was produced using ABS material. It was made with fused filament fabrication (FFF) technology, and the smoothing process was used to improve the surface quality. The piston is part of a complex equipment for underground fertilization of agricultural crops.

This article presents and analyses in two cases the dynamic performance of regulation and control of the linear speed of an electro-hydraulically driven mechatronic axis. In the first case, the flow control is performed with a proportional hydraulic directional control valve, while in the second case the control is performed with a servo-valve. The linear mechatronic axis is part of a complex subsystem used in both agriculture and industry, that allows the precise winding of a hose / cable on a drum with the help of a spooling device, which conditions the positioning of the hose. The speed control of the hydraulic cylinder with bilateral rod on whose liner the spooling device is fixed is performed in a closed loop with the help of transducers and a programmable controller (PLC).

The article presents the optimization of a production process with the help of FDM technology of a fertigation pump prototype that does not require other energy source than that given by the flow and pressure of water for irrigation. In the research presented in this article specimens of PETG material are tested in terms of mechanical properties by using a tensile test equipment. The results of these tests are used to dimension and simulate with finite element the component elements of the pump.

Both in the case of precision agriculture and in the case of some agricultural works, in which the technological process is dependent on the velocity of displacement of the platform carrying the agricultural equipment, it is necessary to precisely adjust or even continuously adjust the velocity of displacement. This article presents the capabilities of continuously regulating the travel velocity of an agricultural platform equipped with a hydrostatic transmission and a PID controller with feedback, feedforward, as well as nonlinear disturbance compensation capabilities; such a platform can be fitted with various agricultural equipment.