No abstract

For this paper an Inconel Nickel alloy was produced by the Powder Metallurgy manufacturing process using Ni, Fe and Cr powder. From the new alloy two Samples-S1 and S2-were produced with different percentages in the composition of the alloying elements. The Samples were compacted at 950 MPa according to ASTM B925-15 section 7 and sintered at 1200 °C in order to obtain an alloy and then to compare the best diffusibility between the alloying elements. The Samples were analyzed by Scanning Electron Microscopy (SEM) and with microprobe by Energy-dispersive X-ray Spectroscopy (EDS). In the results obtained Sample 1 showed a little diffusibility and Sample 2 had good diffusion.