Despite significant interest in CO 2 foams for EOR, very few studies have reported stable foams at high temperatures and high salinities, which are often encountered in the Middle East and elsewhere. Stable CO 2 /water (C/W) foams at high temperatures up to 120 o C and salinities have been achieved with ethoxylated cationic surfactants. The surfactants were shown to stabilize C/W foams with high salinity brine with NaCl concentration up to 182 g/L at 120 °C, 3400 psia, and to form unstable dodecane/water emulsions with the 120 g/L NaCl brine solutions. Thus, the foams have the potential to provide mobility control to prevent loses of CO 2 in high permeability regions, but simultaneously allow high permeability in the presence of residual oil. The surfactants are soluble in CO 2 and thus may be injected in the CO 2 phase to simplify the EOR process. The aqueous solubility of the surfactant at high temperatures is enhanced with the appropriate number of EO groups on the amine head group. Viscosities of high-pressure C/W foams (emulsions) formed with these surfactants were investigated by capillary rheology. These hybrid cationic/nonionic surfactants combine the high cloud points of ionic surfactants with high solubilities in CO 2 of nonionic surfactants. Furthermore, the variation of the tail length and the degree of ethoxylation offer great flexibility for stabilizing CO 2 foams for EOR at high temperatures and high salinities. Ethoxylated cocoamine exhibited lower adsorption on calcite than that on dolomite, given the presence of silica sites in the latter. High divalent ion concentrations in 22% total dissolved solids (TDS) brine contributed to the reduction of surfactant adsorption on silica sites in the dolomite powder.

No abstract

No abstract

No abstract

No abstract