Construction and demolition wastes are widely recognized as the main waste stream in the EU, and their recycling and recovery is an important issue in sustainable building industry development. The composition of construction and demolition wastes is highly heterogeneous and is influenced by several factors, including the raw materials and construction products used. The environmental performance of these materials are therefore considerably variable and, in some cases, do not comply with the regulatory limits established to ensure the protection of the natural environment. In this context, this paper presents a data analysis on the environmental behavior of construction and demolition wastes and recycled aggregates in terms of both chemical composition and the release of contaminants according to a leaching test. Subsequently, the most critical parameters for recovery were identified and statistically evaluated. The leaching results showed that SO4, Cu, and COD are critical compounds for both CDWs and RAs.

This review aims to present and discuss the mechanical and environmental properties of two different type of recycled aggregates obtain from construction and demolition waste (CDW): (1) Recycled Concrete Aggregates (RCA) and (2) Mixed Recycled Aggregates (MRA). In addition, the properties of the concrete in the fresh (workability, water/cement ratio) and hardened state (mechanical and durability properties), as well as the environmental impact of the concrete produced with the two types of recycled aggregates, are presented and discussed. Due to the heterogeneous composition of recycled aggregates, the concrete properties can be significantly variable. The systematic review concerns scientific papers published from 2010 to 2020 and it shows the importance of the selection process in order to obtain high quality CDW as well as of the type of recycled aggregates on concrete properties. In particular, recycled concrete aggregates show a better quality and homogeneity than mixed recycled aggregates that make them more suitable for concrete. This work presents an overview on the influence of recycled aggregate quality on the physical, mechanical and environmental properties of concrete.