Testing of real driving emissions (RDE) with portable emission measuring system (PEMS) in an appropriate road circuit became an obligatory element of new type approval of passenger cars since September 2017. In several projects the Laboratory for Exhaust Emissions Control (AFHB) of the Berne University of Applied Sciences (BFH) performed comparisons on passenger cars with different PEMS’s on chassis dynamometer and on road, considering the quality and the correlations of results. Particle number measuring systems (PN PEMS) were also included in the tests. The present paper informs about influences of E85 on RDE on two flex-fuel-vehicles, discusses some aspects of different ways of evaluation with different programs, shows comparison of different types of PN PEMS and represents the effects of simulation of slope on the chassis dynamometer.

Testing of real driving emissions (RDE) offers the opportunity to collect the data about the emissions in special driving, or non-driving situations. These situations are: cold start, warm-up of the engine, stop & go and idling. In the present work, the definitions of the special driving situations were proposed, the emissions of 7 passenger cars (gasoline & Diesel) were extracted from the present RDE data and some special driving situations, particularly the stop & go operation with varying share of idling were reproduced on chassis dynamometer. As expected, the emissions of CO, NOx and PN are in the cold start and in the first part of the warm-up phase (c.a. 25s) considerably higher than in the rest of the investigated urban phase. The singular emitting situations like “stop & go” or idling occur frequently in the warm-up phase, i.e. in the city operation when the engine and the exhaust system are still not warm enough.