We extend our work on the use of digitally controlled pulsed laser plasma deposition (PLPD) technique to synthesize high quality, 2-dimensional single crystalline boron nitride nanosheets (BNNSs) at a low substrate temperature for applications in high-performance deep UV photodetectors. The obtained sample consists of a large amount of BNNSs partially overlapping one another with random orientations. Each sheet is composed of a few (from 2 to 10) stacked atomic layers exhibiting high transparency due to its highly ordered hBN crystallinity. Deep UV detectors based on the obtained BNNSs were designed, fabricated, and tested. The bias and temperature effects on the photocurrent strength and the signal-to-noise ratio have been carefully characterized and discussed. A significant shift in the cut off wavelength of the BNNSs based photodetectors was observed suggesting a band gap reduction as a result of the BNNSs’ collective structure. The newly designed photodetector presented exceptional properties: a high sensitivity to weak intensities of radiation in both UVC and UVB range while remaining visible-blind, and a high signal-to-noise ratio operation even at temperatures as high as 400 °C. In addition, the BNNSs based photodetector exhibited potential for self-powered operation.

No abstract

Diamond nanowires have recently drawn substantial attention because of their unique physical and chemical properties for electrochemical sensors, optoelectronics, and nanophotonics applications. However, diamond nanowire-based ultraviolet photodetectors have not been reported because of the challenges involved in synthesizing crystalline diamond nanowires with controllable morphologies and, more fundamentally, the material's high carrier concentration with low mobilities that limits the obtainable photoresponsivity. The synergetic integration of ultrananocrystalline diamond (UNCD) nanowires with nanoplasmonic enhancement by noble metal nanoparticles is a very promising approach to overcome these shortcomings. Here we report the fabrication of boron-doped ultrananocrystalline diamond nanowires functionalized with the platinum nanoparticles to form self-powered ultraviolet photodetectors that exhibit an ultrahigh photoresponsivity of 388 Amp/Watt at 300 nm wavelength, a fast response time around 20 ms, and a good UV/visible rejection ratio of about 5 orders of magnitude under zero-bias condition.

No abstract

High-quality two-dimensional (2D) crystalline boron nitride nanosheets (BNNSs) were grown on silicon wafers by using pulsed plasma beam deposition techniques. Self-powered deep ultraviolet (DUV) photodetectors (PDs) based on BNNSs with Schottky contact structures are designed and fabricated. By connecting the fabricated DUV photodetector to an ammeter, the response strength, response time and recovery time to different DUV wavelengths at different intensities have been characterized using the output short circuit photocurrent without a power supply. Furthermore, effects of temperature and plasma treatment on the induced photocurrent response of detectors have also been investigated. The experimental data clearly indicate that plasma treatment would significantly improve both induced photocurrent and response time. The BNNS-based DUV photodetector is demonstrated to possess excellent performance at a temperature up to 400 °C, including high sensitivity, high signal-to-noise ratio, high spectral selectivity, high speed, and high stability, which is better than almost all reported semiconducting nanomaterial-based self-powered photodetectors.