ABSTRACT--A fixture for testing curved sandwich beams in flexure was designed and evaluated. The test specimen is a continuous sandwich beam consisting of a central circular 90 ~ region connected by two straight legs. The fixture was designed according to the four-point flexure principle to produce a pure bending moment in the curved region. The validity of the test fixture in producing the desired loading was examined by fitting a curved aluminum bar of similar bending stiffness as the sandwich beams considered. Strain gage readings were successfully compared to predictions from curved homogeneous beam theory. In addition, the deflection of the beam at the loading points was analyzed using straight and curved beam theory for the various sections of the beam, and predictions were compared to measured load-displacement response. Good agreement was achieved between experimental and analytical results lending confidence to the test principle. Curved sandwich beams consisting of glass/polyester face sheets over a PVC foam core were tested to failure and the loading response of the beams and their failure behavior are discussed. It was found that the beams failed at the upper face/core interface due to radial tension stress.

No abstract