No abstract

No abstract

1-Pseudorandom number generators (PRNGs) are used frequently in secure data processing algorithms. Randomness measuring is an essential test, performed on these generators, that help to range the security of the designed algorithm with respect to assure strong messingup of the processed data. This paper describes a solution for accelerating statistical tests of Diehard Battery based on reconfigurable hardware, benefiting from task parallelization and high frequencies. With this proposal, users can obtain a fast, cheap and reliable measure of the randomness properties that can enable a complete exploration of the design space to produce better devices in shorter times.

No abstract

nents. In addition to that a guideline was written. It contains the minimum time that is necessary to dry all components of the buildings for the most situations. For the investigations a test bench had been built. Different scenarios of the constructions could be tested under real climate conditions of the locations Košice. The scenarios were investigated and the measured data was analysed. The analyses were executed with the simulation program WUFI. The results show that the cellular concrete in combination with the EPS-System needs 28 months to reach the reference humidity w80. The moister effects the u-value of the construction in a negative way. The heat resistance is lower because of the wetness. The averaged influence of the humidity on the effective u-value from the calculated u-value was 20 % in the second heat period. In the third heat period the effective u-value was more than 5 % worse as the calculated. The orientation of the construction and the different thicknesses have a very low influence on the drying process. It is not significant. When mineral wool is used instead of EPS the drying time can be reduced around 50 %. Numeric analyses show that after two months of drying the cellular concrete in combination with EPS reduces the water content by 33 %. When the EPS is installed five months later, the drying time can be reduced by 14 months. This results the same drying time as the mineral wool construction.