No abstract

No abstract

Low temperature plasma (LTP) ionization is an ambient plasma ionization method that permits the direct mass analysis of samples in their native atmospheric environment with little or no sample preparation. In this work, the low temperature plasma probe is used in the direct and rapid mass spectrometric analysis of aqueous phase samples including biofluids (saliva, urine, and hair extract). A detailed trace qualitative examination of 14 drugs of abuse has been performed. The relative standard deviation on average was approximately 16% for the LTP analysis of the drugs of abuse standards. Eleven of the fourteen drugs of abuse were detected in the low ng mL(-1) (3 pg absolute detection) to the mid microg mL(-1) (approximately 30 ng absolute detection) concentration range. One drug, cannabidiol, could not be detected until supplemental heating of the substrate was incorporated into the experimental protocol. The addition of supplemental heating improved the detection limits by at least an order of magnitude to approximately 0.5 ng mL(-1) to 0.5 microg mL(-1) (1.5 pg-1.5 ng absolute) for twelve of the fourteen drugs of abuse, so extending the linear dynamic range which for most analytes was four orders of magnitude. Quantitative capabilities were evaluated using the particular example of benzoylecgonine in urine by employing a deuterated internal standard. Matrix effects observed during the analysis of the drugs in complex biological fluids are also discussed. In addition, low temperature plasma ionization was applied to the examination of real (not spiked) biological samples and these results were confirmed using standard LC/MS methodology. The main advantages observed for this ambient desorption/ionization technique include the capabilities for direct analysis of liquid surfaces for in situ detection and the remarkable sensitivity in the examination of the drugs of abuse investigated here. The disadvantages of the method include the modest quantitative accuracy making LTP most useful as a rapid but semi-quantitative screening method.

Desorption electrospray ionization (DESI) is applied to the rapid, in situ, direct qualitative and quantitative (ultra)trace analysis of agrochemicals in foodstuffs. To evaluate the potential of DESI mass spectrometry (MS) in toxic residue testing in food, 16 representative multiclass agricultural chemicals (pesticides, insecticides, herbicides, and fungicides) were selected (namely, ametryn, amitraz, azoxystrobin, bitertanol, buprofezin, imazalil, imazalil metabolite, isofenphos-methyl, malathion, nitenpyram, prochloraz, spinosad, terbuthylazine, thiabendazole, and thiacloprid). The DESI-MS experiments were performed using 3 microL of solution spotted onto conventional smooth poly(tetrafluoroethylene) (PTFE) surfaces, with examination by MS and tandem mass spectrometry (MS/MS) using an ion trap mass spectrometer. Optimization of the spray solvent led to the use of acetonitrile/water (80:20) (v/v), with 1% formic acid. Most of the compounds tested showed remarkable sensitivity in the positive ion mode, approaching that attainable with conventional direct infusion electrospray mass spectrometry. To evaluate the potential of the proposed approach in real samples, different experiments were performed including the direct DESI-MS/MS analysis of fruit peels and also of fruit/vegetable extracts. The results proved that DESI allows the detection and confirmation of traces of agrochemicals in actual market-purchased samples. In addition, MS/MS confirmation of selected pesticides in spiked vegetable extracts was obtained at absolute levels as low as 1 pg for ametryn. Quantitation of imazalil residues was also undertaken using an isotopically labeled standard. The data obtained were in agreement with those from the liquid chromatography mass spectrometry (LC-MS) reference method, with relative standard deviation (RSD) values consistently below 15%. The results obtained demonstrate the sensitivity of DESI as they meet the stringent European Union pesticide regulation requirements (maximum residue levels) for a large percentage of the studied compounds.

No abstract