Estimating the gain of an antenna prototype is an important step during both design and validation phases. Nevertheless, many small technology companies and universities are not provided with adequate infrastructure to run this type of test. In this paper, we propose a computational tool to deal with undesirable contributions coming from non-ideal test conditions over electromagnetic measurements. It is based on auto-tunable filters and therefore it allows a lab technician to run the test without a major knowledge on signal processing. After a series of evaluations based on lab measurements, the proposed tool gives results as good as those provided by two other approaches but with a reduction of the total number of experimental runs. Furthermore, it is more efficient than the traditional time gating approach for low signal-to-noise ratio environments. Finally, a validation with different antennas and test sites confirmes its robustness.

There is a lack of studies about the susceptibility of LoRa networks to specific interference sources such as broadband jammers and the train catenary, which produces transient interference in a railway environment. In this paper, we investigate this topic by separately analyzing the proprietary LoRa physical layer and the open medium access control layer. Such an approach allows us to decompose the interference effects into two elements: the signal integrity effects at the physical layer and the counter measures of the LoRaWAN protocol.

This work presents a detailed analysis of the susceptibility of LoRa communications in the presence of intentional jamming signals. The analysis is performed with a periodic frequency-sweeping intentional electromagnetic interference, corresponding to the most common jamming signals. Such a waveform faithfully represents the signals emitted by commercial jammers. As the sweep period of the jamming signals may vary from one such device to another, the analyses are conducted with different sweep period values, from 1 μs to 50 μs. The experimental results indicate that the impact varies significantly according to the sweep period of the jamming signal. The detailed analysis allows us to identify the jamming signals to which LoRa communications can be resilient or not as well as to identify which LoRa channels are less affected during an attack.