This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).

No abstract

Partial shading on solar photovoltaic (PV) arrays is a prevalent problem in photovoltaic systems that impair the performance of PV modules and is responsible for reduced power output as compared to that in standard irradiance conditions thereby resulting in the appearance of multiple maximas on panel output power characteristics. These maxims contribute to mismatch power losses among PV modules. The mismatch losses depend on shading characteristics together with different interconnected configuration schemes of PV modules. The research presents a comparative analysis of partial shading effects on a 4 × 4 PV array system connected in series (S), parallel (P), serries-parallel (SP), total-cross-tied (TCT), central-cross-tied (CCT), bridge-linked (BL), bridge-linked total cross-tied (BLTCT), honey-comb (HC), honey-comb total-cross-tied (HCTCT) and ladder (LD) configurations using MATLAB/Simulink. The PV module SPR-X20-250-BLK was used for modeling and simulation analysis. Each module is comprised of 72 number of PV cells and a combination of 16 PV modules was employed for the contextual analysis. Accurate mathematical modeling for the HCTCT configuration under partial shading conditions (PSCs) is provided for the first time and is verified from the simulation. The different configuration schemes were investigated under short-narrow, short-wide, long-narrow, long-wide, diagonal, entire row distribution, and entire column distribution partial shading condition patterns with mathematical implementation and simulation of passing clouds. The performance of array configurations is compared in terms of maximum power generated (Pmp), mismatch power loss (ΔPml), relative power loss (Prl) and the fill factor (FF). It was inferred that on average, TCT configuration yielded maximum power generation under all shading patterns among all PV modules interconnection configurations with minimum mismatch power losses followed by hybrid and conventional PV array configurations respectively.

Automation and modernization of the grid with the availability of micro-grids including non-conventional sources of energy are the main constituent of smart grid technology. Most energy demand is fulfilled by fossil fuel-based power plants. Inadequacy of fuel resources, higher operating costs, and ever-increasing carbon emissions are the primary constraints of fossil fuels-operated power plants. Sustainable energy resource utilization in meeting energy demand is thought to be a preferred solution for reducing carbon emissions and is also a sustainable economic solution. This research effort discusses an accurate mathematical modeling and simulation implementation of a sustainable energy resource model powered by solar, grid, and proton exchange membrane fuel cell (PEMFC) stack and focuses on the energy management of the model. In the proposed model, despite energy resources being sustainable, consumer side sustainability is achieved by using electrical charging vehicles (ECVs) to be integrated with sustainable resources. The proposed energy resource management (ERM) strategy is evaluated by simulating different operating conditions with and without distributed energy resources exhibiting the effectiveness of the proposed model. PEMFC is incorporated in the model to control fluctuations that have been synchronized with other energy resources for the distribution feeder line. In this proposed model, PEMFC is synchronized with grid and solar energy sources for both DC and AC load with ERM of all sources, making the system effective and reliable for consumer-based load and ECVs utilization.

Herein we foremost detailed the numerical modeling of the double absorber layer- methyl ammonium lead iodide– carbon nitride layer solar cell and subsequently provided in-depth insight on the active layer associated with dominant radiative and non-radiative recombination losses limiting the efficiency ( ) of the solar cell. Under recombination kinetics phenomena, we explored the influence of Radiative recombination, Auger recombination, Shockley Read Hall recombination, the energy distribution of defects; Band Tail recombination (Hoping Model), Gaussian distribution, metastable defect states including single donor (0/+), single acceptor (-/0), Double Donor (0/+/2+), double acceptor (2/-/0-), and the interface layer defects on the output characteristics of the solar cell. Setting defect (or trap) density to with uniform energy distribution of defects for all the layers, we achieved the of 24. 16 %. A considerable enhancement in power conversion efficiency was perceived as we reduced the trap density to for the absorber layers. Further, it was observed that for the absorber layer with double donor defect states, the active layer should be carefully synthesized to reduce crystal order defects to keep the total defect density as low as to achieve efficient device characteristics