<p>The denoising of electrocardiogram (ECG) represents the entry point for the processing of this signal. The widely algorithms for ECG denoising are based on discrete wavelet transform (DWT). In the other side the performances of denoising process considerably influence the operations that follow. These performances are quantified by some ratios such as the output signal on noise (SNR) and the mean square error (MSE) ratio. This is why the optimal selection of denoising parameters is strongly recommended. The aim of this work is to define the optimal wavelet function to use in DWT decomposition for a specific case of ECG denoising. The choice of the appropriate threshold method giving the best performances is also presented in this work. Finally the criterion of selection of levels in which the DWT decomposition must be performed is carried on this paper. This study is applied on the electromyography (EMG), baseline drift and power line interference (PLI) noises.</p>

In this paper, we present our contribution in photovoltaic energy optimization subject. In this research work, the goal is to determinate fastly the optimal PV Module working point, allowing maximum power extraction. In this work we use DC-DC Boost converter to control the working point, by adjusting PV voltage trough duty cycle. In order to achieve our goal, we use the combination of incremental conductance MPPT technique and DC-DC Boost converter backstepping control. The validation of this control is made by Matlab simulation; the obtained results prove its effectiveness and its good maximum power tracking dynamics for different irradiance and temperature profiles.

No abstract

No abstract