No abstract

No abstract

Abstract-With the scaling of complementary metal-oxidesemiconductor (CMOS) technology into the nanometer regime, the overshooting effect due to the input-to-output coupling capacitance has more significant influence on CMOS gate analysis, especially on CMOS gate static timing analysis. In this paper, the overshooting effect is modeled for CMOS inverter delay analysis in nanometer technologies. The results produced by the proposed model are close to simulation program with integrated circuit emphasis (SPICE). Moreover, the influence of the overshooting effect on CMOS inverter analysis is discussed. An analytical model is presented to calculate the CMOS inverter delay time based on the proposed overshooting effect model, which is verified to be in good agreement with SPICE results. Furthermore, the proposed model is used to improve the accuracy of the switch-resistor model for approximating the inverter output waveform.

No abstract

The market for wearable devices such as smart watches and smart glasses continues to grow rapidly. Smart glasses are attracting particular attention because they offer convenient features such as hands-free augmented reality (AR). Since smart glasses directly touch the face and head, the device with high temperature has a detrimental effect on human physical health. This paper presents a thermal network model in a steady state condition and thermal countermeasure methods for thermal management of future smart glasses. It is accomplished by disassembling the state by wearing smart glasses into some parts, creating the equivalent thermal resistance circuit for each part, approximating heat-generating components such as integrated circuits (ICs) to simple physical structures, setting power consumption to the heat sources, and providing heat transfer coefficients of natural convection in air. The average temperature difference between the thermal network model and a commercial thermal solver is 0.9 °C when the maximum temperature is 62 °C. Results of an experiment using the model show that the temperature of the part near the ear that directly touches the skin can be reduced by 51.4% by distributing heat sources into both sides, 11.1% by placing higher heat-generating components farther from the ear, and 65.3% in comparison with all high conductivity materials by using a combination of low thermal conductivity materials for temples and temple tips and high conductivity materials for rims.