In this work, we show that the measurement of the Barkhausen noise allows the residual stresses in each of the two phases of ferrite-martensite steels to be characterized. We have first studied the effect of a tensile and a compressive stress on the Barkhausen noise signature. We observed that for a ferrite-martensite steel, the application of a tensile stress increases the Barkhausen activity of the martensite and ferrite phases, whereas a compressive one reduces it. In a second time, we induced residual stresses by applying a plastic deformation to ferrite-martensite steels. After a tensile plastic deformation, we observed that (i) compressive residual stresses appear in ferrite, and (ii) tensile residual stresses appear in martensite. An opposite behavior is observed after a compressive plastic deformation. These results show that the Barkhausen noise measurement makes it possible to highlight in a nondestructive way the distribution of the stresses in each of the two phases of a ferrite-martensite steel. This result could be used to characterize industrial Dual- Phases steels that are plastically deformed during mechanical processes.

No abstract

The potentialities of using the magnetic Barkhausen noise measurement in characterization of metallurgical transformations have been highlighted in multi-phase High Strength (HS) steels. This kind of steels are composed of different metallurgical constituents, such as ferrite, bainite, martensite or residual austenite. Recently, we found that it was possible to assess the proportion of phases in ferrite-martensite steels and in industrial Dual-Phase steels too. In this work, we show that the Barkhausen noise measurements can be also suitable to follow bainitic transformation in a TRIP steel.

No abstract

Magnetic Barkhausen noise measurements have been carried out to characterize ferritemartensite duplex microstructures and industrial Dual-Phase steels. We have first studied ferritemartensite duplex steels, for which the volume fraction and the carbon content of martensite were higher than for industrial Dual-Phase steels. We found linear evolutions between ferrite peak parameters and its proportion. We applied these results to industrial Dual-Phase steels and show that Barkhausen noise measurement can be successfully used for Dual-Phase steels characterization, and in particular for assessment of ferrite proportion.