Magnetic nanoparticles (MNPs) were modified with 3-Mercaptopropytrimethoxysiline (MPTMS) and grafted with allyl glycidyl ether for coupling with beta naphtol as a method to form a novel nano-adsorbent to remove two poly aromatic hydrocarbons (PAHs) from contaminated water. The modified MNPs were characterized by transmission electron microscopy, infrared spectroscopy and thermogravimetric analysis. Results showed that the modified MNPs enhanced the process of adsorption. Tests were done on the adsorption capacity of the two PAHs on grafted MNPs; factors applied to the tests were temperature, contact time, pH, salinity and initial concentration of PAHs. Results revealed that adsorption equilibrium was achieved in 10 min, and the maximum adsorption capacity was determined as 4.15 mg/g at pH = 7.0 and 20°C. The equilibrium adsorption data of the two PAHs by the modified MNPs were analyzed by Langmuir, Freundlich and Temkin models. Equilibrium adsorption data was determined from the Langmuir, Freundlich and Temkin constants from tests under conditions of pH = 7 and temperature 20°C. Analysis of the adsorption-desorption process indicated that the modified MNPs had a high level of stability and good reusability. Magnetic separation in these tests was fast and this shows that the modified MNPs have great potential to be used as a new adsorbent for the two PAHs removal from contaminated water in water treatment.

Novel magnetic nanoparticles (MNPs) modified with (3-mercaptopropyl)-trimethoxysilane (MPTMS), grafted with allyl glycidyl ether and coupled with beta naphthol, were prepared for removal of anthracene in aqueous solutions. The grafted MNPs were characterized by transmission electron microscopy (TEM), infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA). The modified MNPs contributed to enhancement of the adsorption capacity and were prepared by co-precipitation. The modified MNPs were characterized by TEM, FT-IR and TGA and the adsorption and kinetic behavior of anthracene on the modified MNPs was examined. It was shown that the nano-adsorbent optimized adsorption capacity is at pH 7. Three kinetics models: pseudo-first-order, pseudo-second-order, and intraparticle diffusion were used to investigate the adsorption mechanism of the anthracene onto the modified MNPs. The best fit was obtained for the pseudo-second-order model. The synthesized nano adsorbent can be considered as a new method for anthracene adsorption in contaminated water with the benefit of fast removal by applying a magnetic field.

No abstract