The advent of ultra-high power lasers allows laser power levels that are about 1000 times the power of all the power stations in the USA. This opens the way to new approaches for inertial confinement fusions (ICF) that in turn can drastically reduce the laser input energy needed to achieve practical ICF power. The specific approach discussed here involves inducing a fusion burn wave by laser-driven impact of a relatively large block of plasma on the outside of a solid density fusion target. This new method is specifically selected to enable the extremely attractive, but demanding, neutron-free proton-B-11 fusion that potentially can lead to the long sought goal of an ultra ''clean'' fusion power plant.

Hydrodynamic analysis for ignition of inertial fusion by Chu [Phys. Fluids 15, 413 (1972)] arrived at extremely high thresholds of a minimum energy flux density E* at 4×108J∕cm2 which could be provided, e.g., by spark ignition. In view of alternative schemes of fast ignition, a re-evaluation of the early analysis including later discovered collective stopping power and the inhibition factor results in a 20 times lowering of the threshold for E*.

No abstract

Energy production by laser driven fusion energy is highly matured by spherical compression and ignition of deuterium-tritium (DT) fuel. An alternative scheme is the fast ignition where petawatt (PW)-picosecond (ps) laser pulses are used. A significant anomaly was measured and theoretically analyzed with very clean PW-ps laser pulses for avoiding relativistic self focusing. This permits a come-back of the side-on ignition scheme of uncompressed solid DT, which is in essential contrast to the spherical compression scheme. The conditions of side-on ignition thresholds needed exorbitantly high energy flux densities E*. These conditions are now in reach by using PW-ps laser pulses to verify side-on ignition for DT. Generalizing this to side-on igniting solid state density proton-Boron-11 (HB11) arrives at the surprising result that this is one order of magnitude more difficult than the DT fusion. This is in contrast to the well known impossibility of igniting HB11 by spherical laser compression and may offer fusion energy production with exclusion of neutron generation and nuclear radiation effects with a minimum of heat pollution in power stations and application for long mission space propulsion.

Fast ignition for fusion energy by using petawatt-picosecond (PW-ps) laser pulses was modified due to an anomaly based on extremely clean suppression of prepulses. The resulting plasma blocks with space charge neutral ion current densities above 1011Amp/cm2may be used to ignite deuterium-tritium at densities at or little above solid state density. The difficulty is to produce extremely high energy flux densities of the blocks. Results are reported how the threshold can be reduced by a factor up to fife if the inhibition factor for thermal conductivity due to electric double layers is included in the hydrodynamic analysis.