Detecting early warning signals of developing mood disorders in continuously collected affective experience sampling (ESM) data would pave the way for timely intervention and prevention of a mood disorder from occurring or to mitigate its severity. However, there is an urgent need for online statistical methods tailored to the specifics of ESM data. Statistical process control (SPC) procedures, originally developed for monitoring industrial processes, seem promising tools. However, affective ESM data violate major assumptions of the SPC procedures: The observations are not independent across time, often skewed distributed, and characterized by missingness. Therefore, evaluating SPC performance on simulated data with typical ESM features is a crucial step. In this article, we didactically introduce six univariate and multivariate SPC procedures: Shewhart, Hotelling's T 2 , EWMA, MEWMA, CUSUM and MCUSUM. Their behavior is illustrated on publicly available affective ESM data of a patient that relapsed into depression. To deal with the missingness, autocorrelation, and skewness in these data, we compute and monitor the day averages rather than the individual measurement occasions. Moreover, we apply all procedures on simulated data with typical affective ESM features, and evaluate their performance at detecting small to moderate mean changes. The simulation results indicate that the (M)EWMA and (M)CUSUM procedures clearly outperform the Shewhart and Hotelling's T 2 procedures and support using day averages rather than the original data. Based on these results, we provide some recommendations for optimizing SPC performance when Psychology and Education Sciences,

No abstract

Proper closure is an essential packaging quality aspect and can, amongst others, be achieved with ultrasonic sealing. The ultrasonic sealing performance depends on the film type, and the seal settings, such as seal time, applied force and ultrasonic amplitude. Because these parameters are less intuitive than heat seal parameters and optimal settings are undefined for many films, this work presents an efficient approach to evaluate the effect of these settings on the ultrasonic sealing performance. An experimental design defines the experiments to perform. A response surface methodology is then used to model the relation between seal settings and sealing performance. Based on these models, the seal settings are optimized. As there are several criteria to express sealing performance, single-criteria and multicriteria optimizations are described.The approach was illustrated for a polyethylene terephthalate/linear low-density polyethylene-C4 film. The seal settings were optimized to obtain high seal strength, limited ultrasonic horn displacement, and low seal energy. The optimum settings were 0.1 seconds (seal time), 4.32 N/mm (force), and 28.75 μm (amplitude). The predicted optimum strength, horn displacement, and energy were 2.32 N/mm, 40 μm, and 11.66 J, respectively. Besides the optimum, the seal window is also of interest. A broad seal window ensures sufficient seal strength for a wide range of settings. For the polyethylene terephthalate/linear low-density polyethylene-C4 film, a strength of ≥90% of the optimum was obtained for 39% of the input combinations within the design space.The presented approach is widely applicable (other films and sealing processes) since it is flexible in the input parameters, design, and responses. KEYWORDSdesign of experiments, multicriteria seal optimization, polyolefin packaging, response surface methodology, ultrasonic sealing

In the egg industry, fast and highly reliable quality measurements are crucial. This study presents a novel method based on Hertz contact theory that allows for non-destructive determination of eggshell strength. The goal of the study was to evaluate the material strength (Young’s Modulus) and structural strength (stiffness) of eggshells. To this end, an experimental setup was constructed to measure the collision of an eggshell with a small steel ball, which was recorded using a laser vibrometer. The study analyzed a sample of 120 eggs and found a correlation of 0.85 between the traditional static stiffness measured during quasi-static compression tests and the stiffness obtained from the Hertz contact theory. The results show that Hertz contact theory is valid for small steel spheres impacting eggshells, while a sensitivity analysis indicated that the most important factor in determining the strength of the eggshell is the contact duration between the egg and the impactor. These results open up the possibility of grading eggs based on their shell strength in a non-destructive manner.

INTERPRETATIVE SUMMARYValidation of luteolysis monitoring tool Adriaens.Recently, a novel progesterone-based monitoring algorithm using synergistic control, PMASC, was developed. This algorithm employs the known luteal dynamics of the progesterone profile to estimate the moment of luteolysis with minimal dependence on the absolute measurement values. As its value and implementability strongly dependends on the number of samples it requires to obtain the desired accuracy, its performance on cost-effective, ‘smart’ sampled and on-farm measured data is demonstrated.SHORT COMMUNICATIONValidation of a novel milk progesterone based tool to monitor luteolysis in dairy cows. Performance on cost-effective, on-farm measured data