No abstract

No abstract

The Ni-based under-bump metallurgies (UBMs) are of interest because they have a slower reaction rate with Sn-rich solders compared to Cu-based UBMs. In this study, several UBM schemes using Ni as the diffusion barrier are investigated. Joints of Sn-58Bi/Au/electroless nickel (EN)/Cu/Al 2 O 3 and Sn-58Bi/Au/electroplated nickel/Cu/Al 2 O 3 were aged at 110°C and 130°C for 1-25 days to study the interfacial reaction and microstructural evolution. The Sn-Bi solder reacts with the Ni-based multimetallization and forms the ternary Sn-Ni-Bi intermetallic compound (IMC) during aging at 110°C. Compositions of ternary IMC were (78-80)at.%Sn-(12-16)at.%Ni-(5-8)at.%Bi in joints of Sn-58Bi/Au/Ni-5.5wt.%P/Cu, Sn-58Bi/Au/Ni-12wt.%P/Cu, and Sn-58Bi/Au/Ni/Cu. Elevated aging at 130°C accelerates the IMC growth rate and results in the formation of (Ni,Cu) 3 Sn 4 and (Cu,Ni) 6 Sn 5 adjacent to the ternary Sn-Ni-Bi IMC for the Sn-58Bi/Au/Ni-12wt.%P/Cu and Sn-58Bi/Au/Ni/Cu joints, respectively. The Cu content in the (Cu,Ni) 6 Sn 5 IMC is six times that in (Ni,Cu) 3 Sn 4 . Electroplated Ni fails to prevent Cu diffusion toward the Ni/solder interface as compared to EN-based joints. Cracks are observed in the Sn-58Bi/Au/Ni-5.5wt.%P/Cu/Al 2 O 3 joint aged at 130°C for 25 days. It is more favorable to employ Ni-12wt.%P for the Sn-58Bi/Au/EN/Cu joint. Electroless nickel, with the higher P content of 12 wt.%, is a more effective diffusion barrier during aging. In addition, P enrichment occurs near the interface of the EN/solder, and the degree of P enrichment is enhanced with aging time. The Au(Sn,Bi) 4 , with pyramidal and cubic shape, is observed in the Sn-58Bi/

No abstract

No abstract