Although platinum (Pt)-based catalysts are suffering from high costs and limited reserves, they are still irreplaceable in a short period of time in terms of catalytic performance. Structural optimization, composition regulation and carrier modification are the common strategies to improve the activity and stability of Pt-based catalyst. Strikingly, the morphological evolution of Pt-based electrocatalyst into nanoframes (NFs) have attracted wide attention to reduce the Pt consumption and improve the electrocatalytic activity simultaneously. Contrary to Pt-based solid nanocrystalline materials, Pt-based NFs have many advantages in higher atomic utilization, open space structure and larger specific surface area, which facilitate electron transfer, mass transport and weaken surface adsorption by more unsaturated coordination sites. Here we introduce the detailed preparation strategies of Pt-based NFs with different etching methods (oxidative etching, chemical etching, galvanic replacement and carbon monoxide etching), crystal structure evolution and formation mechanism, efficient applications for oxygen reduction reaction (ORR), methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) in direct alcohol fuel cells (DAFCs). Based on the high-efficiency atom utilization, open space structure and diverse alloy composition, Pt-based NFs exhibit superior activity, stability and anti-poisoning than commercial counterparts in the application of DAFCs. The current challenges and future development of Pt-based NFs are prospected on the type of NFs materials, synthesis and etching methods, crystal control and catalytic performance. We propose a series of improvement mechanisms of Pt-based NFs, such as small size effect, high-energy facets, Pt-skin construction and Pt-C integration, thereby weakening the molecule absorption, increasing the Pt utilization, strengthening the intrinsic stability, and alleviating the metal dissolution and support corrosion. Additionally, the scale-up synthesis of catalytic materials, membrane electrodes assembly, and development of the start-stop system and the circulation system design are essential for the commercial application of Pt-based NFs and industrial manufacturing of DAFCs. More importantly, the reaction mechanism, active site distribution and dynamic changes in the catalytic material during the catalytic reaction are crucial to further explain the maintenance and evolution of catalytic performance, which will open a window to elucidate the improvement mechanism of the catalyst in the fuel cell reactions. This review work would promote continuous upgradations and understandings on Pt-based NFs in the future development of DAFCs.

A novel three-dimensional (3D) composite based on reduced graphene oxide (rGO)/Fe2O3 was prepared by a one-pot hydrothermal method. Fe2O3 nanoparticles were either attached on the surface of graphene sheets or coated uniformly by the graphene sheets. The resulting composite is found to self-assembly form into a 3D network via the hydrothermal treatment. Our results indicate that the as-prepared Fe2O3 nanoparticles show the porous morphology, which results in that the rGO/Fe2O3 composites exhibit excellent microwave absorbing properties in the range of 2-16 GHz and is expected to be a promising candidate as microwave absorbing materials.

No abstract

Europium(III) (Eu3+)‐doped polyurethane films were prepared by mixing Eu‐methacrylic acid complex (Eu(MA)3) with aliphatic polyurethane oligomer and subsequently curing under UV irradiation. Transmission electron microscopy photos and the appearance of the resulting hybrid films showed that phase separation occurred only at an Eu(MA)3 content above 20 wt.‐%. Fluorescence spectra indicated that the fluorescence of Eu3+ was barely influenced by the polyurethane matrix and its intensity increased with an Eu(MA)3 content in the range of approximately 0 to 10 wt.‐%. An obvious applied external‐field‐dependent magnetization (M) of polyurethane/Eu(MA)3 films, namely, an increasing M at low field and a decreasing M at high field, was observed at room temperature from the hysteresis loops, which was influenced by both the Eu(MA)3 content and the ultrasonication imposed on the coatings before curing. It seems that ultrasonication leads to a thermodynamically‐unstable structure of Eu3+ in hybrid films, which can be fixed by UV curing but gradually rearranges to its original form during the thermal‐curing process, and enhances the diamagnetic part of the hybrid film. Thus, the magnetic property of Eu3+‐doped polyurethane film at room temperature can be adjusted by simply changing the preparation method and the Eu(MA)3 content instead of the type of Eu3+‐organic complex.magnified image

No abstract