No abstract

No abstract

No abstract

This article deals with the subject of layers produced in a hybrid process combining hardfacing and nitriding. These layers are characterized by improved resistance to wear, which arises from the synergy between favorable materials during hardfacing and nitriding treatment. Tests were conducted on hot-work tool steel (H11) samples. Hardfaced layers consisting of three layers were applied to these samples, where layers were made from two materials—Robotool 46 and Hardface VMolc powder wires. Next, samples of both materials were nitrided using ZeroFlow gas nitriding technology, with control of potential aimed at obtaining a diffusion layer without a white zone of nitrides on the surface. The next step was to investigate the properties of hardfaced layers and of layers hardfaced after nitriding treatment. Conducted tests covered observations of the microstructure, microhardness measurements as a function of distance from the surface, measurement of stresses in the surface layer by means of X-ray diffraction, and tribological tests. Obtained test results show that hybrid layers combining hardfacing and nitriding may be suitable for improving the lifetime of tools applied in hot forging processes.

No abstract