No abstract

No abstract

Bacterial cellulose (BC) films with different porosities have been developed in order to obtain improved mechanical properties. After 13 days of incubation of Gluconobacter xylinum bacteria in static culture, BC pellicles have been set. BC films have been compression molded after water dispersion of BC pellicles and filtration by applying different pressures (10, 50, and 100 MPa) to obtain films with different porosities. Tensile behavior has been analyzed in order to discuss the microstructureproperty relationships. Compression pressure has been found as an important parameter to control the final mechanical properties of BC films where slightly enhanced tensile strength and deformation at break are obtained increasing mold compression pressure, while modulus also increases following a nearly linear dependence upon film porosity. This behavior is related to the higher densification by increasing mold compression pressure that reduces the interfibrillar space, thus increasing the possibility of interfibrillar bonding zones. Network theories have been applied to relate film elastic properties with individual nanofiber properties.

No abstract

Novel nanostructured thermosetting materials have been prepared by modification of an epoxy resin with a semifluorinated diblock copolymer, poly(heptadecafluorodecyl acrylate)-b-poly(caprolactone), PaFb-PCL. In a first step, the phase behavior and linear viscoelasticity of PaF-b-PCL were investigated. According to the segregation regime, no order-order transitions were detected, being the order-disorder transition temperature beyond the degradation temperature. Atomic force microscopy (AFM) images of the block copolymer after different thermal treatments revealed that self-assembly takes place into spherical nanodomains, which is consistent with the copolymer composition. This block copolymer was further used to prepare a nanostructured thermoset blend with an epoxy resin. DSC and DMA analysis reveals microphase separation of PaF block from the epoxy-rich phase after curing. The PaF block self-assembled into wormlike and spherical micelles in the thermoset system. This nanostructured blend presented unique surface properties showing high hydrophobicity (υ ) 109°) and low surface energy (17 mN/m).