The PETTICOAT technique may offer a safe and promising adjunctive endovascular maneuver for patients with distal malapposition of the dissecting membrane and false lumen flow. The technique can both abolish distal true lumen collapse and enhance the remodeling process of the entire dissected aorta.

Rapid RV pacing is safe in selected patients and in experienced hands. It abbreviates hemodynamic compromise, shortens the endovascular procedure, and may eventually emerge as the preferred method to avoid the windsock effect during stent-grafting. The maneuver, however, requires knowledge of right cardiac anatomy and expertise in selecting patients.

HAR in zone 1 and 2 appears a viable alternative to conventional aortic arch surgery in patients with complicated type B dissection. Stroke and endoleaks remain complications that need to be addressed. Treatment of type B aortic dissection with complete supra-aortic debranching and thoracic endovascular aortic repair in zone 0, however, is associated with high mortality, which might be reduced by improved technology using branched stent grafts.

Abstract-Safe vascular stent application requires rapid expansion of the stent to minimize the risk of procedural ischemia. While high expansion speeds can be achieved with metallic stents, they are not necessarily feasible with biodegradable polymeric stents due to the viscoelastic material behavior. This study reports on a novel biodegradable polymer blend material based on poly(L-lactide) (PLLA) and poly(4-hydroxybutyrate) (P4HB), and describes the mechanical properties and in vitro degradation behavior of a balloon-expandable slotted tube stent concept. The stent prototypes with nominal dimensions of 6.0 · 25 mm were manufactured by laser machining of solution cast PLLA/ P4HB tubes (I.D. = 2.8 mm, d = 300 lm). The stents were expanded within 1 min by balloon inflation to 8 bar, after 5 min preconditioning in 37°C water. Recoil and collapse pressure were 4.2% and 1.1 bar, respectively. During in vitro degradation collapse pressure initially increased to a maximum at 4 w and then decreased thereafter. After 48 w, molecular weight was decreased by 82%. In summary, the PLLA/P4HB slotted tube stents allowed for rapid balloonexpansion and exhibited adequate mechanical scaffolding properties suitable for a broad range of vascular and nonvascular applications.

No abstract