No abstract

Quantitative analysis of the X-ray pair distribution function collected on calcium silicate hydrates having Ca/Si ratios ranging between 0.57 and 1.47 was applied. With increasing Ca/Si ratio, Si bridging tetrahedra are omitted and Ca(OH)2 is detected at the highest ratios.

Understanding calcium silicate hydrates (CSHs) is of paramount importance for understanding the behavior of cement materials because they control most of the properties of these man-made materials. The atomic scale water content and structure have a major influence on their properties, as is analogous with clay minerals, and we should assess these. Here, we used a multiple analytical approach to quantify water distribution in CSH samples and to determine the relative proportions of water sorbed on external and internal (interlayer) surfaces. Water vapor isotherms were used to explain the water distribution in the CSH microstructure. As with many layered compounds, CSHs have external and internal (interlayer) surfaces displaying multilayer adsorption of water molecules on external surfaces owing to the hydrophilic surfaces. Interlayer water was also quantified from water vapor isotherm, X-ray diffraction (XRD), and thermal gravimetric analyses (TGA) data, displaying nonreversible swelling/shrinkage behavior in response to drying/rewetting cycles. From this quantification and balance of water distribution, we were able to explain most of the widely dispersed data already published according to the various relative humidity (RH) conditions and measurement techniques. Stoichiometric formulas were proposed for the different CSH samples analyzed (0.6 < Ca/Si < 1.6), considering the interlayer water contribution.