This paper reports an organic-inorganic hybrid solar cell with a hierarchical surface composed of high density silicon nanoholes and micro-desert textures. High-efficiency organic-inorganic hybrid solar cell Si/PEDOT-PSS with a hierarchical surface, showing a power conversion efficiency of 12%. The structure provides excellent light absorption over 97% for the spectral range of 300 to 1100 nm with a thickness of 60 μm due to internal multiple reflections caused by subwavelength features of high density silicon nanoholes and micro-desert textures. In addition, from the angle of incidence (AOI) observed, even at the large angle of 75°, the reflectance value still exhibits less than 1%. With the advantage of very thin silicon material and inexpensive processing, hybrid silicon/polymer solar cells are promising for various applications and thus could be an economically feasible alternative energy solution in the future.

PSS via a low-pressure-assisted coating process, excellent light harvesting without sacrificing the minority-carrier lifetime, and efficient charge separation/collection of photogenerated carriers.

In this paper, we investigate the morphology, optical, and electrical properties of silicon nanowire (SiNW) arrays and their applications on inorganic/organic hybrid solar cells. The SiNW arrays are obtained by two kinds of metal-assisted chemical etching (MacEtch) processes. One is depositing assisted metal, for example, Ag, by an electron gun evaporator before etching (BE). The other is depositing assisted Ag during the etching (DE) process. The results reveal that BE method MacEtch can produce more uniform and denser SiNW arrays, but the coverage of organic materials to SiNWs is less. In terms of optical properties, the BE method SiNW arrays have higher reflectance than the DE method ones, except the wire length less than 1 mm in the wavelength range less than 500 nm. Regarding the electrical property, the minority-carrier lifetime is higher for the DE method SiNW arrays because of less surface area of SiNWs. Therefore, the best cell performance happens on the DE method SiNW/organic hybrid solar cell with wire length less than 1 mm. The short-circuit current density (J sc ) is 28.55 mA/cm 2 , open-circuit voltage (V oc ) is 0.524 V, and power conversion efficiency (PCE) is 9.56%.

The SiNH arrays exhibit excellent light-absorbing structures and higher optical trapping as compared to SiNW arrays, resulting in leading performance power conversion efficiency of 11.25% in the hybrid organic–inorganic solar cells.