No abstract

Seawater, NaOH, NaClO, NaClO2, H2O2 and KMnO4 were used as scrubbing liquids to react with SOx and NOx separately in a customized wet scrubber. The absorption of SO2 in the aqueous phase was influenced by three factors: pH, ionic concentration and oxidation potential. For NOx removal, the effectiveness of various chemical compounds can be ranked from least to most effective as follows: Seawater, NaOH, H2O2 < NaClO < KMnO4 < NaClO2. This effectiveness was influenced by the chemical compound’s ability to oxidize NO to NO2, absorb the NO2 that was formed and retaining the nitrogen in the aqueous phase. High oxidation potential promoted the oxidation of NO to NO2 but hindered the absorption of NO2. NaClO2 was superior compared to NaClO in all three categories of oxidizing, absorption and retention. NaClO could not retain a significant amount of NO2 which it absorbed in the aqueous phase. The pH around 8 provided a good balance between oxidation versus absorption/retention and reactant utilization for the chlorine-based oxidants. KMnO4 had the lowest reactant consumption rate; only half a mole was consumed for every mole of NO removed, compared to around 2–3 moles of chlorite or 3–5 moles of hypochlorite.