This minireview describes the main developments of electronic tongues (e-tongues) and taste sensors in recent years, with a summary of the principles of detection and materials used in the sensing units. E-tongues are sensor arrays capable of distinguishing very similar liquids employing the concept of global selectivity, where the difference in the electrical response of different materials serves as a fingerprint for the analysed sample. They have been widely used for the analysis of wines, fruit juices, coffee, milk and beverages, in addition to the detection of trace amounts of impurities or pollutants in waters. Among the various principles of detection, electrochemical measurements and impedance spectroscopy are the most prominent. With regard to the materials for the sensing units, in most cases use is made of ultrathin films produced in a layer-by-layer fashion to yield higher sensitivity with the advantage of control of the film molecular architecture. The concept of e-tongues has been extended to biosensing by using sensing units capable of molecular recognition, as in films with immobilized antigens or enzymes with specific recognition for clinical diagnosis. Because the identification of samples is basically a classification task, there has been a trend to use artificial intelligence and information visualization methods to enhance the performance of e-tongues.

No abstract

We present a compact and easy to handle instrument developed to perform rapid analysis of liquids utilizing an “electronic tongue” system. Briefly, the e-tongue used here is based on impedance measurements of an array of sensing units fabricated with ultrathin films of different materials deposited onto gold interdigitated electrodes. The instrument has the capability of measuring up to eight different sensor sets, each comprising an array of eight sensing units, and can perform a series of measurements in less than half of an hour. Additionally, there is a user-friendly software interface for instrument control, allowing the statistical correlation of samples using principal component analysis.

The wide variety of molecular architectures used in sensors and biosensors and the large amount of data generated with some principles of detection have motivated the use of computational methods, such as information visualization techniques, not only to handle the data but also to optimize sensing performance. In this study, we combine projection techniques with micro-Raman scattering and atomic force microscopy (AFM) to address critical issues related to practical applications of electronic tongues (e-tongues) based on impedance spectroscopy. Experimentally, we used sensing units made with thin films of a perylene derivative (AzoPTCD acronym), coating Pt interdigitated electrodes, to detect CuCl(2) (Cu(2+)), methylene blue (MB), and saccharose in aqueous solutions, which were selected due to their distinct molecular sizes and ionic character in solution. The AzoPTCD films were deposited from monolayers to 120 nm via Langmuir-Blodgett (LB) and physical vapor deposition (PVD) techniques. Because the main aspects investigated were how the interdigitated electrodes are coated by thin films (architecture on e-tongue) and the film thickness, we decided to employ the same material for all sensing units. The capacitance data were projected into a 2D plot using the force scheme method, from which we could infer that at low analyte concentrations the electrical response of the units was determined by the film thickness. Concentrations at 10 μM or higher could be distinguished with thinner films--tens of nanometers at most--which could withstand the impedance measurements, and without causing significant changes in the Raman signal for the AzoPTCD film-forming molecules. The sensitivity to the analytes appears to be related to adsorption on the film surface, as inferred from Raman spectroscopy data using MB as analyte and from the multidimensional projections. The analysis of the results presented may serve as a new route to select materials and molecular architectures for novel sensors and biosensors, in addition to suggesting ways to unravel the mechanisms behind the high sensitivity obtained in various sensors.