We present the combination of electrochemiluminescence imaging with enzyme immunoassay for the highly sensitive detection of protein/polypeptide residues in latent fingermarks. This technique provides an effective method for fingermark detection that enables both identification of an individual and recognition of the secretions in the human perspiration.

No abstract

CdZnTe detectors have been under development for the past two decades, providing good stopping power for gamma rays, lightweight camera heads and improved energy resolution. However, the performance of this type of detector is limited primarily by incomplete charge collection problems resulting from charge carriers trapping. This paper is a review of the progress in the development of CdZnTe unipolar detectors with some data correction techniques for improving performance of the detectors. We will first briefly review the relevant theories. Thereafter, two aspects of the techniques for overcoming the hole trapping issue are summarized, including irradiation direction configuration and pulse shape correction methods. CdZnTe detectors of different geometries are discussed in detail, covering the principal of the electrode geometry design, the design and performance characteristics, some detector prototypes development and special correction techniques to improve the energy resolution. Finally, the state of art development of 3-D position sensing and Compton imaging technique are also discussed. Spectroscopic performance of CdZnTe semiconductor detector will be greatly improved even to approach the statistical limit on energy resolution with the combination of some of these techniques.

High finesse hollow-core photonic bandgap fiber (HC-PBF) resonating Fabry-Perot gas cells are presented. These gas cells are made with a piece of HC-PBF sandwiched by two single mode fibers with mirrored ends. A HC-PBF cavity made with 6.75-cm-long HC-1550-06 fiber achieved a cavity finesse of 128, corresponding to an effective optical path length of ~5.5 m. Experiment with a 9.4-cm-long Fabry-Perot gas cell with a finesse of 68 demonstrated a detection limit of 7 p.p.m. acetylene. Compared with a single-path non-resonating HC-PBF, the use of a high finesse resonating HC-PBF cavity can reduce significantly the effect of modal interference on gas detection and improve the detection sensitivity. The cavity-enhanced HC-PBF gas cells enable stronger light-gas interaction and can be used to develop all-fiber gas sensors with high sensitivity and fast response.