The stabilized space-time fluid-structure interaction (SSTFSI) technique was applied to arterial FSI problems soon after its development by the Team for Advanced Flow Simulation and Modeling. The SSTFSI technique is based on the Deforming-Spatial-Domain/Stabilized SpaceTime (DSD/SST) formulation and is supplemented with a number of special techniques developed for arterial FSI. The special techniques developed in the recent past include a recipe for pre-FSI computations that improve the convergence of the FSI computations, using an estimated zero-pressure arterial geometry, Sequentially Coupled Arterial FSI technique, using layers of refined fluid mechanics mesh near the arterial walls, and a special mapping technique for specifying the velocity profile at inflow boundaries with non-circular shape. In this paper we introduce some additional special techniques, related to the projection of fluid-structure interface stresses, calculation of the wall shear stress (WSS), and calculation of the oscillatory shear index. In the test computations reported here, we focus on WSS calculations in FSI modeling of a patient-specific middle cerebral artery segment with aneurysm. Two different structural mechanics meshes and three different fluid mechanics meshes are tested to investigate the influence of mesh refinement on the WSS calculations.

SUMMARYNew special fluid-structure interaction (FSI) techniques, supplementing the ones developed earlier, are employed with the Stabilized Space-Time FSI (SSTFSI) technique. The new special techniques include improved ways of calculating the equivalent fabric porosity in Homogenized Modeling of Geometric Porosity (HMGP), improved ways of building a starting point in FSI computations, ways of accounting for fluid forces acting on structural components that are not expected to influence the flow, adaptive HMGP, and multiscale sequentially coupled FSI techniques. While FSI modeling of complex parachutes was the motivation behind developing some of these techniques, they are also applicable to other classes of complex FSI problems. We also present new ideas to increase the scope of our FSI and CFD techniques.

SUMMARYWe address the computational challenges related to the extraction of the arterial-lumen geometry, mesh generation and starting-point determination in the computation of arterial fluid-structure interactions (FSI) with patient-specific data. The methods we propose here to address those challenges include techniques for constructing suitable cutting planes at the artery inlets and outlets and specifying on those planes proper boundary conditions for the fluid mechanics, structural mechanics and fluid mesh motion and a technique for the improved calculation of an estimated zero-pressure arterial geometry. We use the stabilized space-time FSI technique, together with a number of special techniques recently developed for arterial FSI. We focus on three patient-specific cerebral artery segments with aneurysm, where the lumen geometries are extracted from 3D rotational angiography.

Multiscale versions of the Sequentially-CoupledArterial Fluid-Structure Interaction (SCAFSI) technique are presented. The SCAFSI technique was introduced as an approximate FSI approach in arterial fluid mechanics. It is based on the assumption that the arterial deformation during a cardiac cycle is driven mostly by the blood pressure. First we compute a "reference" arterial deformation as a function of time, driven only by the blood pressure profile of the cardiac cycle. Then we compute a sequence of updates involving mesh motion, fluid dynamics calculations, and recomputing the arterial deformation. The SCAFSI technique was developed and tested in conjunction with the stabilized space-time FSI (SSTFSI) technique. Beyond providing a computationally more economical alternative to the fully coupled arterial FSI approach, the SCAFSI technique brings additional flexibility, such as being able to carry out the computations in a spatially or temporally multiscale fashion. In the test computations reported here for the spatially multiscale versions of the SCAFSI technique, we focus on a patient-specific middle cerebral artery segment with aneurysm, where the arterial geometry is based on computed tomography images. The arterial structure is modeled with the continuum element made of hyperelastic (Fung) material.

SUMMARYWe address some of the computational challenges involved in fluid-structure interaction (FSI) modeling of clusters of ringsail parachutes. The geometric complexity created by the construction of the parachute from 'rings' and 'sails' with hundreds of gaps and slits makes this class of FSI modeling inherently challenging. There is still much room for advancing the computational technology for FSI modeling of a single raingsail parachute, such as improving the Homogenized Modeling of Geometric Porosity (HMGP) and developing special techniques for computing the reefed stages of the parachute and its disreefing. While we continue working on that, we are also developing special techniques targeting cluster modeling, so that the computational technology goes beyond the single parachute and the challenges specific to parachute clusters are addressed. The rotational-periodicity technique we describe here is one of such special techniques, and we use that for computing good starting conditions for FSI modeling of parachute clusters. In addition to reporting our preliminary FSI computations for parachute clusters, we present results from those starting-condition computations. In the category of more fundamental computational technologies, we discuss how we are improving the HMGP by increasing the resolution of the fluid mechanics mesh used in the HMGP computation and also by increasing the number of gores used. Also in that category, we describe how we use the multiscale sequentially coupled FSI techniques to improve the accuracy in computing the structural stresses in parts of the structure where we want to report more accurate values. All these special techniques are used in conjunction with the Stabilized SpaceTime Fluid-Structure Interaction (SSTFSI) technique. Therefore, we also present in this paper a brief stability and accuracy analysis for the Deforming-Spatial-Domain/Stabilized Space-Time (DSD/SST) formulation, which is the core numerical technology of the SSTFSI technique.