The construction cost is estimated based on the drawings at the design stage and constructor will find efficient construction methods for budgeting and budgeting appropriate to the budget. Accurate quantity estimation and budgeting are critical to determining whether the project is profitable or not. However, since this process is mostly performed depending on manpower or 2D drawings, errors are likely to occur and The BIM(Build Information Modeling) program, which can be automated, is very expensive and difficult to apply in the field. In this study, 3D architectural modeling was performed using SketchUp which is a 3D

An Ortho-image is the production of removed geometrical displacement, which is generated the aerial image distortion and the relief displacement, etc., using the DSM (Digital Surface Model). Accordingly, the resolution of raw image and the accuracy of DSM will has significant impacts on the ortho-image accuracy. Since the latest DMCⅡ250 aerial camera delivers the high resolution images with five centimeters Ground Sampling Distance(GSD), it expects to generate the high density point clouds and the high quality ortho-images. Therefore, this research has planned for reviewing the potentiality and accuracy of high quality ortho-image production. Following to proceed the research, DSM has been produced through the high density point cloud extracted from DMCⅡ250 aerial image to supply of high density DSM by creation of ortho-image. The research results has been identified that images with the DSM brought out higher degrees in positional accuracy and quality of ortho-image, compared with the ortho-image, produced from the existing digital terrain map or DSM data. This is an Open Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http:// creativecommons.org/licenses/by-nc/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

The object of this research is to elicit the ecological wetland's creating and maintaining conditions through GIS and AHP(Analytic Hierarchy Process) on common characteristics of wetland, by exploring the function of the long-standing and naturally created wetlands in South Han-river basin. Geomorphological, geologic, hydraulic & hydrological, pedological, environmental & ecological approaches of five categorizations were made based on the documents and precedent studies in order to perform the research object. Elicitation of the common creating and maintaining conditions on the objected wetlands through analysis of satisfactory conditions was conducted by performing an overlay analysis from the gathered information in each category and linking its result to each wetland. Also, elicitation of highly believable qualified analysis result was made by calculating the each factor's weight through application of AHP analysis method on each factor. The research result is expected to be applied effectively in suitability selection for creation of an artificial wetland and restoration and maintenance for naturally created wetlands when introducing the No Net Loss of Wetlands. In addition, with a new understanding on wetland and beyond the value of its conservativeness, this research result can be considered as a solution for Eco-Wetland's maintainable development.

The purpose of this Study is to analyze the accuracy of a network RTK GPS, by performing taping, triangulation & Network RTK (Real Time Kinematic) GPS observation on certain measuring points and comparing all locational data based on the calculational & geometric solution method. The deviation in the measured length & coordinate between the steel tape and the Network RTK GPS was within 2cm while the deviation in the measured coordinate between the triangulation and the Network RTK GPS was within 3cm. With the fact that the performance of the taping or the triangulation is less sensitive to its surroundings taken into consideration, it could be concluded that an average locational accuracy of most Network RTK GPS processes in Korea was within 3cm.

The modern society is changing paradigm by the 4th industrial revolution. In these changes, the importance of geospatial information leading to the fusion and connection of persons and objects is increasing day by day. GNSS CORS(Continuously Operating Reference Station) plays a pivotal role in the geospatial information by providing basic data for surveying control points, mapping, navigation, geophysical research, and so on. On the other hand, the satellite surveying technologies are developing rapidly and it is