Khabbaz oilfield has a symmetrical subsurface anticline with a length of 20 km and a width of 4 km. Despite the fact that Khabbaz oilfield has a small size structure, it is known as one of the massive Oilfields in Iraq. The reservoirs of Khabbaz oilfield are produced by both Cretaceous and Tertiary rocks. The Upper Qamchuqa reservoir is the most productive reservoir of the Khabbaz oilfield with thickness ranges between 138 to 170 m. This formation is subdivided into two units, from the top is Unit A with a thickness of 67 m and from the bottom is Unit B with a thickness of 84.5 m. From a full set of log data of three wells (Kz-1, Kz-13 and Kz-14), the petrophysical properties of Khabbaz oilfield has been evaluated. The wireline log data includes gamma-ray log, sonic log, neutron log, density log and resistivity logs, both Rxo and Rt logs. This study revealed that Unit A represents the best reservoir characteristics where Unit A is subdivided into six reservoir subunits named (1-A, 2-A, 3-A, 4-A, 5-A and 6-A). They are separated by five non-reservoir subunits named 1-N, 2-N, 3-N, 4-N and 5-N. In addition to a less porous reservoir unit that is called Unit B, which has been divided into four reservoir subunits named 1-B, 2-B, 3-B and 4-B. These are separated by five non-reservoir units named 1-N, 2-N, 3-N, 4-N and 5-N. It has been recognized that both reservoir units A and B are clean formations and have minimum shale volume with high porosity in limestone and dolomite to dolomitic limestone lithology with high oil saturation and low water saturation. Based on the above reservoir characteristics it can be concluded that the reservoir units of the Khabbaz oilfield contain a massive commercial hydrocarbon accumulation.