It is based on actual working conditions and parameters of the hydraulic steering gear, to reach the purpose of the optimizing rubber by different rubbers mixing technology. Comparison the five kinds rubber and metal of the friction characteristics in dynamic fit, obtained a performance excellent rubber in the specific operating conditions. Then improve the overall service life of the transportation equipment. It is first prepared the same hardness TPU and PVC and blends that is ratio of 2:8, 5:5and8:2 in this article. The pros and cons of the five rubbers are analyzed by friction and wear properties of the above experimental. The test curve of coefficient friction and wear with time has been done under different load at constant low speed, friction and wear and wear mechanism of five rubbers with chrome-plated steel comparatively analyses to determine TPU/PVC = 8:2 blends has the heat resistance and wear resistance are better than TPU and PVC under dry sliding conditions.

Based on actual working conditions and parameters of the hydraulic steering gear, the purpose is optimizing the rubber seal of steering gear by different rubbers mixing technology. Compare the five kinds of rubber with metal of the friction characteristics in dynamic fit, it can obtain a performance excellent rubber real in the specific operation conditions. And then improve the overall service life of the steering gear. It is first prepared the same hardness TPU and PVC and blends that the ratio is 3:7, 5:5and7:3 in this article. The pros and cons of the five rubbers are analyzed in friction and wear properties of the above experimental. The test curve of coefficient friction and wear with time has been done under different load at constant low speed. It determines TPU/PVC = 3:7 blends through friction and wear and wear mechanism of five rubbers with steel comparatively analyses, and the heat resistance and wear resistance of them are better than the other TPU/PVC blends and PVC under oil lubrication conditions.