A growth model for a plantation of Paraserianthes falcataria was provisionally derived from measurements of 32 permanent plots taken over a period of 2 years in Pare, Indonesia. This model first predicts height growth with the polymorphic site index equation. Then density-related growth and mortality, that is, diameter and stand density, are calculated to satisfy the mathematical relationship for the reciprocal and self-thinning equations, both of which were based on the maximum size-density line with the slope of -1.759 identified in this study. Cumulative predictions on diameter and stand density, starting with each of three age classes, 3, 4, and 5 years after planting, and continuing for the next 2 years, agreed well with the observations of age-class mean. An exception was for stands that were 7 years old, which were marginal, but closest to the rotation age of 8 years. Contrasting height/diameter relationships among the three age classes were described reasonably well with this model, and the predicted basal growth area was found to agree fairly well with observations. These results suggest that the growth model presented here has good potential for applying sizedensity control for plantations of P. falcataria. However, measurements for an additional few years might be necessary to derive a model that will more accurately predict diameter size at the rotation age.

A stem taper equation compatible to the volume equation was derived from the data of 172 trees sampled in the three plantations of Paraserianthes falcataria in Pare, East Java. The stem taper equation in this study was based on a conventional logarithmic volume equation, with the addition of one free parameter that minimized the standard errors of estimate to the observed diameter of stems at 1.0-m intervals. The derived equation was able to predict the stem taper of P. falcataria reasonably well, while it was not flexible enough to describe delicate changes of the taper in the upper portion of stem. The equation was able to predict bole length and the volume up to the top diameter 20 cm, the diameter size merchantable for sawn timber in Indonesia, with reasonable accuracy. An appropriate rotation age for sawn-timber production was found to be 8-9 years old, at which the mean annual increment of sawn timber would be maximized.