No abstract

The transformation of high-frequency vibrations of piezoelectric elements into continuous linear motion of a slider is one of the main tasks of a linear piezoelectric motor. To produce a high thrust force in the piezoelectric linear actuator, we proposed the compound piezoelectric linear actuator based on a ''shaking beam'' excited by two sources of longitudinal mechanical vibrations shifted by =2. The compound actuator consists of two shaking beams and is rigidly fastened. The finite element method (FEM) was used to define structural and electrical boundary conditions for the compound piezoelectric actuator. FEM analysis showed that the compound actuator's trajectory was elliptical. Experimental research has shown that the compound piezoelectric actuator has high thrust force.

No abstract

111 this paper, SAW(Surfxe Acoustic Wave) resonator 1s used to detect flmmable and explosive gases SAW resonators are dcsignecl by using COM(Coup1ed Mode) theory and niadc through IC fabrimtion processes. The gases uscd in this euperiment are CH4, and

-This study investigated the process of thermal-induced growth of micro-crack developed at the crystalline solar cell using EL image, determined the output characteristic according to the pattern of micro-crack, analyzed the I-V characteristic according to the pattern of crack growth, and predicted the output value using simulation. The purpose of this study was, therefore, to investigate the process of thermal-induced growth of micro-crack developed at the early stage of PV module completion using EL image, to analyze the resulting decrement of output and predict the output value using simulation. It was observed that the crack grew increasingly by the thermal condition, and accordingly the lowering of output was accelerated. The output values of crack patterns with various direction were predicted using simulation, resulting in close I-V curve with only around 4% of error rate. It is considered that it is possible to predict the electric characteristic of solar cell module using only pattern of micro-crack occurred at solar cell based on our results.