The new trends in decoration of family homes are aimed at solving home called smart home (hereafter SH). Looking definition for intelligence SH is different for the user, investor, architect or designer SH devices. This means that the SH functions are chosen differently, the definition of SH is inconsistent. This paper presents a new approach in the proposal optimum choice of functions, which are based on a hierarchical categorization of functions; classification of types of user SH and SH defined the concept of intelligence. Our approach to the solution of SH provides the direct use of the software support system design specification of user requirements in a form that is suitable for hardware and software implementation of SH functions.

Electrocardiography (ECG) is a diagnostic method that allows sensing and record the electric activity of heart [. The measurement of electrical activity is used as a standard twelve-point system. At each of these leads to measure the useful signal and interference was measured. The intensity of interference depends on the artefacts (electrical lines, brum, motion artefacts, muscle, interference from the environment, etc.). For correct evaluation of measured signal there is a need to processing the measured signal to suitable form. At present, the use of electrocardiograms with sensors with contact scanning are difficult to set a time so we decided to use the principle of non-contact sensing. Such a device to measure the ECG was constructed under the project. The disadvantage of such devices is a problem with a high level of noise, which degrades a useful signal. The aim of this article is to pre-process the signals obtained from non-contact sensing. The contactless devices are powered from the network and battery. The electrodes were connected by way of Eithoven bipolar leads. Signals were pre-treated with suitable filters so that they are also appropriate for their subsequent analysis. In the filtration ECG signals was used as a method of linear (low pass filter, high pass, IIR (Infinite Impulse Response) peak, notch filter. The results of many signals clearly demonstrate removing noise in the ECG signals to the point that is also suitable for their analysis.

No abstract

No abstract

No abstract