No abstract

a b s t r a c tExperiments were carried out according to the Nordtest protocol to study the moisture buffer potential of hemp-lime walls with a range of different internal linings and surface treatments. It was observed that the moisture buffer value was 'Excellent' when the inner surface of hemp-lime was exposed. 'Excellent' moisture buffer values were also obtained for hemp-lime with lime plaster. All other assemblies demonstrated 'Good' moisture buffer value. Moisture buffer values of the assemblies, after application of paint on the upper surfaces, were also determined. It was observed that application of synthetic pigment based trade paint could reduce the moisture buffer performance of the assembly consisting of hemp-lime and lime-plaster from 'Excellent' to 'Good' while between 61 and 69% reduction of moisture buffer value was observed for the other assemblies. However, the reduced buffer values of the assemblies are still comparable with other moisture buffering building materials. It was further observed that moisture buffer performance was improved when clay based organic paint was used instead of trade paint.

The paper presents the results of a laboratory investigation on the hygric properties of five hemp insulation materials commercially available in the UK. The hemp fibre content varies between 30-95% in the total fibre content of the insulation materials examined. The adsorption-desorption isotherm, moisture buffer value, vapour diffusion resistance factor and water absorption coefficient were determined for the insulation materials investigated. The results showed that the hygric properties of the hemp insulation materials could vary widely depending on the constituents and fibrous structure. The considerable differences noted in the hygric properties of the insulation materials examined could potentially influence their hygrothermal performance as part of a building thermal envelope.