The increasing technological advances obtained both in the development of new materials and of machine tools increased the demand for the machining processes and in addition, the use of increased cutting fluids. However, it’s necessary to have characteristics that don’t harm the environment and the operator. In machining processes, cutting fluids, when properly chosen and applied, may reflect benefits during the manufacturing process. This work evaluated the performance of a commercial cutting fluid by comparing it with vegetable oil extracted from carapa guianensis in the abnt 1045 steel turning process. The cutting speed (vc), tool feed (f) and depth (ap) and the influence of the use of both of them on the metal was verified with the following variables: chip analysis, surface finish, cutting temperature and tool wear. It was observed that with the use of andiroba oil, better chip was generated for the safety of the operator, higher cutting temperatures in the piece, higher tool wear and better surface finish with a difference of 23% compared to commercial cutting fluid. Thus, the fluid from andiroba based on the conventional application demonstrated a viable alternative in the turning process of abnt 1045 steel, because it’s biodegradable and reduces petroleum-based cutting fluids.