No abstract

This study used test frames were purposely detailed and constructed with observed deficiencies in investigated dormitory buildings of Turkey. In this study, four reinforced concrete frames were produced two storeys, one bay and 3D in 1/6 geometric scale was tested. Since the studied frame was the external frame of the structure, brick infill wall with a window opening was also included. The first specimen was the reference specimen and contained no strengthening and no brick wall. The second specimen was contained brick wall. The third specimen was strengthened with internal steel panel. Finally fourth specimen’s was strengthened with infilled RC shear wall. The test specimens were subjected to reversed cyclic quasi-static lateral loading. Strength of the test specimens were measured and compared. Test results indicated that the strengthened specimens displayed significantly higher lateral strength than the reference specimen considerably.

No abstract

No abstract

Recently repair and strengthening of existing buildings become a popular research topic. The strengthening of buildings necessitates the evacuation of the structure. On the other hand, school, hospital type structures must continue their function. In this study exterior shear wall addition to the existing exterior frames is proposed. Since the application is applied to the exterior of the building, the structure can continue its function during the application. In this study, 1/3 scaled 4 specimens were tested under reversed cyclic loading simulating the seismic action. First reference specimen was the bare frame and didnt contain a strengthening and tested to see the reference behavior. Specimens have several design mistakes to represent the existing older structures. The other specimens retrofitted with different configurations. The second specimen was strengthened with exterior shear walls and contained a window opening. The last specimen was also retrofitted with exterior shear wall but the shear walls were divided into two pieces. The load-displacement curves, envelope curves, relative displacement curves, energy absorption curves and rigidity curves were presented and compared within the paper. In the conclusion, the capacity increase of the frame was discussed and several recommendations were presented.