The aim of the study was to assess the influence of adding Al2O3 nano-particles of 0.5 wt. % with the mean particle size of 500 nm on the mechanical properties and wear behaviour of the austenitic stainless steel matrix reinforced with nano-particles produced by conventional ingot casting. The focus was on the methods and possibilities of homogeneous and uniform distribution of the particles within the steel matrix using conventional casting routes. The main drawback of the casting method used is the agglomeration of the particles and poor interface between the particles and the metal matrix. The results show that through a proper insertion method, nano-particles can be successfully introduced into the metal matrix. The Al2O3 nano-particles were successfully incorporated into the steel matrix with no signs of clustering and intermetallic reactions taking place between the nano-particles and the steel matrix. This led to improved mechanical properties as well as the wear behaviour of the stainless steel, achieved by using conventional casting routes.