The availability of multispectral images, with both high spatial and spectral resolution, makes it possible to obtain valuable information about complex urban environment, reducing the need for more expensive surveying techniques. Here, a methodology is tested for the semi-automatic extraction of buildings and the mapping of the main roofing materials over a urban area of approximately 100 km2, including the entire city of Bologna (Italy). The methodology follows an object-oriented approach and exploits a limited number of training samples. After a validation based on field inspections and close-range photos acquired by a drone, the final map achieved an overall accuracy of 94% (producer accuracy 79%) regarding the building extraction and of 91% for the classification of the roofing materials. The proposed approach proved to be flexible enough to catch the strong variability of the urban texture in different districts and can be easily reproducible in other contexts, as only satellite imagery is required for the mapping.

The recent improvement of infrared image quality has increased the use of thermography as a non-destructive diagnostic technique. Amongst other applications, thermography can be used to monitor historic buildings. The present work was carried out within the framework of the Horizon 2020 European project SHELTER, which aims to create a management plan for cultural heritage subject to environmental and anthropogenic risk. Among the chosen case studies is the Santa Croce Complex in Ravenna (Italy), which is exposed to different hazards, including flooding. The church has a peculiar architecture that develops below the street level, so the internal walls are affected by the deterioration caused by rising humidity. In such a case of advanced degradation, passive thermography cannot be used to its full potential. For this reason, an innovative methodology involving active thermography was first developed and validated with laboratory tests. Secondly, we conducted its first application to a real case study. With this purpose, an active thermography survey with forced ventilation was carried out to enhance different stages of material degradation by means of automatic classification of multitemporal data. These experiments have resulted in a method using an active thermal survey in a high moisture content environment to detect masonry degradation.

No abstract

No abstract

No abstract