The MediumResolution Imaging Spectrometer (MERIS) was launched in March 2002 and has been providing images since June 2002. Before its launch, we had implemented a method to improve its resolution by merging its images with Landsat Enhanced Thematic Mapper images in order to preserve the best characteristics of the two images (spatial, spectral, temporal). We now present the results of this method for real MeRIS images (level 1b and 2) in a coastal area. The robustness of the method is studied as well as the influence of the delay between the acquisitions of the two images . Index Terms − Fusion, Landsat Enhanced Thematic Mapper (ETM), Medium Resolution Imaging Spectrometer (MERIS).

No abstract

International audienceDrying is the most critical elaboration step of large monolithic and crack-free silica aerogel plates. In the present work, we are studying the supercritical CO2 drying and more precisely the first step, here called the supercritical washing step. This phase consists of replacing the liquid phase contained in the nanopores with supercritical CO2. Within this study, this step is governed by molecular diffusion through the gels. These phenomena were investigated experimentally in order to estimate the duration of the washing step. The experimental results were then fitted with an analytical mass transfer model to identify the effective diffusion coefficient

No abstract

International audienceA 3-phase AC plasma torch has been developed and aims at overcoming some limits of the classical DC torches in terms of efficiency, cost and reliability. However, the arc behavior in 3-phase plasma torch remains poorly explored. This paper is dedicated to the high speed video camera at 100,000 frames per second and electrical signal analyses of arcs behavior in a 3-phase AC arc plasma torch. First, a reference case at 150 A, in nitrogen as working gas, has been deeply analyzed. Afterwards, a parametric study based on current and inter-electrode gap has been carried out. Results show that only one arc can exist at a given time and arcs rotate by switching from a pair of electrodes to another one, following the maximal electrical gap potential. However, a particular "abnormal" arc behavior was sometimes observed. Indeed, the arc motion within the inter-electrode gap increases the heat exchange and stabilizes the 3-phase discharge whereas the system is unbalanced when the arc is in the periphery. The analysis highlights that the arc motion is strongly influenced by the electrode jet velocity and repulsive Lorentz forces. The parametric study shows that the current increases both jet velocity and arc discharge stability. Elsewhere, the increase of the inter-electrode gap can also stabilizes the electrical 3-phase arc discharge. Furthermore, the correlation between arc motion and current waveform is highlighted. This work is likely to open the way toward a better understanding of 3-phase discharges in the perspective of their further optimization